**************************************************************************
Juzisound MIDI System For Accordion - Firmware Update Procedure
**************************************************************************


//////////////////////////////////////////////////////////////////////////
//  What is need to execute update:
//////////////////////////////////////////////////////////////////////////

1. Computer with Windows OS.
2. Installed audio card with MIDI interface or any another MIDI interface.
3. One standard MIDI cable. 
   (special connector is need for update MIDI Kit)



//////////////////////////////////////////////////////////////////////////
// How to update Accordion MIDI System
//////////////////////////////////////////////////////////////////////////
1. Connect MIDI OUT of you computer to MIDI IN1 of Juzisound MIDI Kit.
   MIDI Input of Kit is available on Sensor Board.
2. Power UP MIDI System, and wait until startup procedure complete.
3. Start software "JuzisoundFirmwareLoader.exe" on computer
4. Press button [Load Firmware File].
3. Sellect file "Acc MIDI System - Firmware Version X.X.jsf" (X.X is curent version)
   This autommatically sellect device type and you see accordion image.
4. From tab "MIDI Connection" sellect MIDI OUT interface, of you computer.
5. Press button [Start Firmware Update Procedure].
6. Press button [YES].
7. Press button [OK].
8. Wait until update complete.
   While update is in progress, you see progress indicator on computer
   and leds on Juzisound MIDI Kit pannel...
9. How to check current version? (before or after update)
   When device start, device show current version for small time period.